Job Memory - Panasonic DP-1810F Operating Instructions Manual

Job Memory

Two Copy Jobs Can Be Programmed in Memory (M1, M2) for recall at a
later time.
JOB MEMORY
PRESS M1,M2 TO STORE.
RECALL JOB MEMORY
LOADING...
CStored job(s) will not be deleted even if the power switch is turned Off.
NOTE
C When storing a new job into programmed memory, the previously stored job
will be overwritten.
Creative Features
To Store a Job in Memory
# Set up the copy job to be stored in memory,
by first selecting each function you wish the
copier to perform.
$ Press the MEMORY IN (F2) key.
% Press the M1 (F3) or M2 (F4) key.
To Recall a Job Stored in Memory
& Place the Original
( Press the M1 (F3) or M2 (F4) key.
The stored contents will be displayed.
) Press START
21