Panasonic DP-1810F Operating Instructions Manual page 11

LCD Display
Warning Indicators
Add Paper
J
? Add Toner
Misfeed
I
Call Service
2
No
INTERRUPT Key, MEMORY IN Key, M1/M2 Keys
C Interrupt Key interrupts other copy or print jobs while making copies.
4
C Memory In Key registers two copy jobs for recall at a later time.
C M1/M2 Keys are used to store a Job in Memory or to recall a Job stored in Memory.
Cursor Keys C C C C C Select copy ratio and function modes using (G or F).
5
6 PAPER TRAY Key
COPY SIZE Key
7
C Used to select Reduction/Enlargement only. For additional details, see page 13.
ORIGINAL SIZE Key
8
C Used to select the original size manually. For additional details, see page 13.
9
PRINT Key
:
COPY Key
; Alarm LED (Red)
Active LED (Green) C C C C C Lights when machine is active.
=
NOTE
Contents
C C C C C Used to select the paper tray manually.
C C C C C When selecting the Printer ON/OFF Line.
C C C C C Press when using the unit as a photocopier.
C C C C C Lights when trouble occurs.
C The Control Panel displayed above shows only copier functions. Please refer
to the appropriate operating instructions for the control panel functions or in
the Panasonic Doccument Management System CD-ROM for the Printer
control panel functions.
∗
When the machine detects a problem or an alarm status is activated, the ;
Alarm LED lights up or begins to flash.
LED Lights: Machine detected a trouble status
C No paper in the selected tray or toner has run out.
C Machine detected trouble, such as paper misfeed or jam.
LED Flashes: Machine detected an alarm status
C No paper in the tray. (Tray not selected)
C Running low on toner, etc.
Control Panel
Refer to
Pages 21, 23
*
——
——
——
——
——
——
——
——
11