Weil-McLain 550 MBH Nstallation And Operation Manual page 80

®
SlimFit Series 3
DIAGNOSTICS menu
Displays cumulative time the burner has been active (can be increased by user)
Records the days of operation passed from the last time the Master boiler rotated the firing sequence.
Displays cumulative time that Input 1 has been closed (Or 0-10V t 1 volt)
Displays cumulative time that Input 2 has been closed
Displays cumulative time that Input 3 has been closed
Records time this boiler was running on a network call for heat generated by the Master boiler
Displays total number of successful ignitions
Displays boiler control type and ID number
Shows if control is currently linked to a Master control
Shows number of boilers currently on network
Shows if this control is being requested to satisfy a network call
Shows whether the control is Network-P1, Network-P2, or NONE
Rate coming from the Master
Displays maximum allowable boiler temperature
Temperature differential from master boiler for network priorities
Temperature differential from master boiler for network priorities
Shows current rate of boiler
Shows Boiler Out temperature of boiler
Shows priority being satisfied, updated based on active demand
Shows system type of call for heat, updated based on active demand
Shows the sequence position of that boiler in all the boilers available
Shows boiler number this data belongs to
Displays boiler number
Displays input's configuration and whether it is active. If input is active, it will be displayed in
Display Software version of the microprocessor on the display circuit board
Main Micro Software version of the main microprocessor on the control circuit board
Second Micro Software version of the second microprocessor on the control circuit board
To reset all history counters to zero: Enter the DIAGNOSTICS menu. Then press and hold the left and right arrows
located below the control display. Hold for 5 seconds. This will cause ALL history to be deleted. To maintain
history, reset counters individually.
Displays number of control faults
Displays cumulative ignition attempts. It is recommended that his be reset during yearly maintenance by holding down the
Displays number of manual reset lockouts since last cleared
Displays number of auto reset lockouts since last cleared
Choose this to view the most recent error recorded
Displays the name of the fault that occurred
Displays the type of fault that occurred
80
COMMERCIAL CONDENSING GAS
(continued)
menu details (continued) (see Figure 58, page 70 for access information)
arrows or by selecting this line and pressing the
—
-
FIRED WATER BOILER
button
Boiler Manual
print
Part number 550-100-168/0516
and