Radio Display Message
XM Theftlocked
XM Radio ID
Unknown
Check XM Receiver
CD Player
To load/eject a music CD, do the following:
1. Turn the ignition on.
2. Press the faceplate tilt hard key. This will open
the faceplate of the system.
3. Press the eject hard key with the CD symbol.
If a CD is already loaded, the CD will eject from
the slot.
3-14
Condition
Theft lock active
Radio ID label
(channel 0)
Radio ID not known
(should only be if
hardware failure)
Hardware failure
Action Required
The XM™ receiver in the vehicle may have previously been
in another vehicle. For security purposes, XM™ receivers
cannot be swapped between vehicles. If this message is
received after having your vehicle serviced, check with
your dealer.
If tuned to channel 0, this message alternate with the
XM™ Radio eight digit radio ID label. This label is needed to
activate the service.
If this message is received when tuned to channel 0,
you may have a receiver fault. Consult with your dealer.
If this message does not clear within a short period of time,
the receiver may have a fault. Consult with your dealer.
4. Gently remove the CD from the slot and return
it to its case.
5. Insert the music CD into the slot. The system will
pull the disc into the player.
6. Press and release the faceplate tilt hard key to
close the faceplate.
Whenever the faceplate is opened, a warning message
will display reminding you to close the faceplate as
soon as possible.