Setting Radio Station Presets; Setting The Time - Chevrolet 2006 Corvette Navigation Manual

Setting Radio Station Presets

To set preset radio stations, do the following:
1. Press the power/volume knob to turn the
system on.
2. Press the SRCE hard key and select the desired
band (AM, FM1, FM2, XM1, or XM2 (if equipped)).
3. Use the TUNE/SEEK arrows to tune to the
desired station.
4. Press and hold one of the six preset screen
buttons, at the bottom of the screen, until you
hear a beep or see the station displayed on the
selected preset button.
5. Repeat the steps for each preset.
See "Preset Station Menu" under Navigation Audio
System on page 3-2 for more information.
1-6

Setting the Time

To set the time, do the following:
1. Press the power/volume knob to turn the
system on.
2. Press and hold the time display in the upper right
corner of any screen.
3. Select the 12H or 24H screen button to display the
time in standard or military time.
4. Press and hold the Hour and Min. (minute) arrow
buttons to increase or to decrease the time.
5. Select the appropriate time zone screen button.
6. Select the Daylight Saving Time screen button,
if necessary.
The radio will use the GPS satellite to set the time.
The vehicle needs to be in an open area to receive the
signal. See "Clock" under Navigation Audio System
on page 3-2 for more information.