Map Commands - Chevrolet 2006 Corvette Navigation Manual

Position Commands
Current Position, Current Location, Show Current
Position, Show Current Location: These commands
will cause the system to display the vehicle's current
location on the map screen.
Map: This command will cause the system to display
the map screen.

Map Commands

Zoom In: This command will cause the system to zoom
in when on the map screen.
Zoom In Maximum: This command will cause the
system to zoom in to the minimum available map scale
when on the map screen.
Zoom Out: This command will cause the system to
zoom out when on the map screen.
Zoom Out Maximum: This command will cause the
system to zoom out to the maximum available map scale
when on the map screen.
Heading Up, Change to Heading Up: These commands
will cause the system to display the Vehicle Up heading
when on the map screen.
4-4
North Up, Change to North Up: These commands will
cause the system to display the North Up heading
when on the map screen.
Map Direction, Change Map Direction: These
commands will cause the system to change the vehicle's
direction from North up to heading up or heading up
to North up on the map screen.
Mark, Mark This Point: These commands will cause
the system to mark the location as a memory point while
on the map screen.
Right Map Zoom In: This command will cause the
system to zoom in on the right map when in dual
map mode.
Right Map Zoom In (Maximum/Minimum Scale):
This command will cause the system to zoom in to the
minimum available map scale on the right map when
in dual map mode.
Right Map Zoom Out: This command will cause the
system to zoom out on the right map when in dual
map mode.
Right Map Zoom Out (Maximum/Maximum Scale):
This command will cause the system to zoom out to the
maximum available map scale on the right map when
in dual map mode.