Cd Player - Chevrolet 2013 Corvette Owner's Manual

To load/eject a music CD:
1. Turn the ignition on.
2. Press . This opens the
faceplate of the system.
3. Press . If a CD is already
loaded, the CD ejects from
the slot.
4. Gently remove the CD from the
slot and return it to its case.
5. Insert the music CD into the slot.
The system pulls the disc into
the player.
6. Press and release
the faceplate.
When the faceplate is opened, a
warning message displays as a
reminder to close the faceplate as
soon as possible.
Once a music CD is loaded, the CD
player menu displays.
If the ignition or radio is turned off
while a CD is in the player, it stays
in the player. When the ignition or
radio is turned on, the CD starts to
play where it stopped, if it was the
last selected audio source.
As each new track starts to play, the
track number displays.
The CD player can play the smaller
8 cm (3 in) single CDs with an
adapter ring. Full-size CDs and the
smaller CDs are loaded in the same
manner.
If playing a CD-R the sound quality
can be reduced due to CD-R quality,
to close
the method of recording, the quality
of the music that has been
recorded, and the way the CD-R
has been handled. There can be an
increase in skipping, difficulty in
finding tracks, and/or difficulty in
loading and ejecting. If these
problems occur, check the bottom
surface of the CD. If the surface of
the CD is damaged, such as
cracked, broken, or scratched, the
CD does not play properly. If the
surface of the CD is soiled, take a
soft lint free-cloth, or dampen a
clean soft cloth in mild detergent
solution mixed with water, and clean
it. Make sure the wiping process
starts from the center to the edge.
If there is no apparent damage, try a
known good CD.