To Replace The Lamp - NEC LT260K User Manual

Hide thumbs Also See for LT260K:

Table of Contents

Available languages

To replace the lamp:

1. Loosen the lamp cover screw until the screwdriver goes into a freewheel-

ing condition and remove the lamp cover. The lamp cover screw is not

2. Loosen the two screws securing the lamp housing until the screwdriver

goes into a freewheeling condition. The two screws are not removable.

3. Remove the lamp housing by pulling out the handle.

NOTE: There is an interlock on this case to prevent the risk of electrical shock.

Do not attempt to circumvent this interlock.