5
Selection of Input Modules
The SRX-series projectors are equipped with several input board slots that users can fill with a mixture of the
following input modules. On the SRX-S110 and SRX-S105 models, one DVI input board is pre-installed and three
slots are available for the installation of input modules.
The SRX-R110 and SRX-R105 models have four available slots for the installation of input configurations. These have
no pre-installed boards.
Users can select the input boards most appropriate to their system requirements by referring to the chart below. If
more detailed information about the input boards is required, please refer to Appendix 1.
4K (4,096 H x 2,160 V pixels at 1.896:1 aspect ratio) images can be projected by combining four 2K images with
2,048 x 1,080 pixels from four interface boards.
For SRX-S110/S105, INPUT A and three LKRI-004 interface boards are required.
For SRX-R110/R105, four LKRI-003 or LKRI-004 interface boards are required.
One DVI interface board pre-installed
Four input board slots
Three input board slots
SRX-R110/R105
SRX-S110/S105
SRX-series 4K Projector - System Installation Guide
14