Setting The Time - Fresenius Medical Care CRIT-LINE III User Manual

The month data entry window will appear.
To set the month:
To set the day, scroll the cursor next to DAY in the DATE MENU and press
SELECT. The numeric data entry window will then appear.
Scroll the cursor next to the number of the first digit in the current day. Press Select
Do the same for the second digit in the day and press SELECT.
The DATE MENU window will then become active again allowing you to set the
YEAR using the same procedure.
NOTE: If you inadvertently choose a wrong digit when correcting the day and year,
scroll to DEL (delete) and push SELECT to erase the entry. If the day or year is a
single digit number you must select zero as the first digit and then select the digit
that signifies the day or year.
Once you have finished setting the date, scroll to RETURN on the DATA MENU
and press SELECT. This will return you to the INITIAL DATA screen. If you make
a mistake, simply repeat the above process.

Setting the Time

Choose TIME ADJUST from the INITIAL DATA screen. Using the same procedure used to
set the date, set the hours (24-hour clock) and minutes of the internal clock
Once the time has been set, scroll to RETURN and press Select. This will return you to the
INITIAL DATA screen.
NOTE: If you inadvertently choose the wrong first digit, scroll to DEL (delete) and
press SELECT to erase the entry. If the hour or minute is a single digit number you can
enter the single digit and then select SAVE to enter that digit. Or you can select zero as
the first digit and then select the digit that signifies the hour or minute.
NOTE: Once you have initiated blood volume monitoring you cannot reset the date and
time without cycling the power, clearing the memory and accessing the INITIAL DATA
screen. But, you can also change the date and time between patient runs.
Using the CRIT-LINE III
3-7
Scroll the cursor
next to the current
month. Press
Select.