Entering The Station Id; Entering The Name - Fresenius Medical Care CRIT-LINE III User Manual

Do the same for each character. If you wish to enter a space, scroll to that option
instead of a letter. Once you have entered the third letter or space, pressing SELECT
will take you back to the INITIAL DATA screen. If you choose less than four
characters, pressing SAVE will take you back to the INITIAL DATA screen.
NOTE: If the patient's ID is only one letter, select the letter and then select SPACE
twice. If you inadvertently select the wrong first initial select DEL (delete) to erase
the entry. You can change the Patient ID, Station ID, or NAME any time during
the dialysis session. If you plan on storing more than one dialysis session,
recirculation test or spot check, be sure to always enter the patient ID so the
printout can be referenced back to the individual patient for which data has been
gathered. Patient data is erased from the monitor when the current dialysis
session is stopped.

Entering the Station ID:

Once you are back into the INITIAL DATA screen, scroll to STATION ID and press
SELECT:
This will open and activate the numeric data entry window. Scroll to the first digit of the
Station ID and press SELECT.
Next, scroll to the second digit of the STATION ID and press SELECT. This will
save your entry and return you to the INITIAL DATA screen
NOTE: If the station ID is only one digit, select zero as the first digit. DEL (delete)
will also allow you to erase a previous entry.

Entering the Name

The CLM III also provides the option to enter up to 12 digits for name or ID number. The ability
to enter this data has been included so that printed and downloaded data can be easily identified,
and it will only appear on the printed data sheet and the downloaded data. The option is only
available in the English software.
To enter a name or ID number, scroll to NAME and press SELECT.
Using the CRIT-LINE III
3-9
Scroll to NAME and
press SELECT.