System Requirements; Supported Hardware; Supported Software; Supported Card Brands - VeriFone Commander Site Controller Configuration Manual

System Requirements

Supported Hardware

EMV implementation requires PINpad hardware with EMV Chip
Reader capability.
• MX800 Series: MX 850, 860, 870, and 880 support EMV functions if equipped with a
chip reader.
• MX900 Series: MX915 and MX925
• Commander Site Controller/RubyCi with Topaz
• Commander Site Controller/RubyCi with Ruby2
• Sapphire V910/V920 with Topaz
• Sapphire V910/V920 with Ruby

Supported Software

Commander Site Controller/RubyCi systems require Production Software Base 42+.
Sapphire systems require Production Software Base 188+.
POS System Software may be eligible to Upgrade through
Verifone's Remote Software Delivery. For more information visit
support.verifone.com
Convenience>Product Pages: Verifone Remote Software Delivery.
All MX PINpad devices require VIPERPay 4.xx+
MX900 Series devices require Kernel 7.00+.
MX800 Series devices require Kernel 4.00+ and must have RFS18.
MX800 Series devices without RFS18 must be upgraded at the Verifone repair facility.
See How to Tell if Your MX800 Series PINpad is EMV Capable
Refer to the Inside Contact EMV Feature Reference for details on
determining software versions of MX and POS devices.

Supported Card Brands

Inside contact EMV supports the following card brands:
• American Express
• Discover
• Mastercard
• Visa
and select Support Channels>Petro &
2
at support.verifone.com.