Table of Contents
Advertisement
RADIO SET
Receiver
Transmitter
(helicopter type only
6 or more channels)
ENGINE
Glow Plug
HELI ENGINE(60-70size)
1.5V Glow starter
12V Battery
(1.2V~1.5V)
Training Gear
(for beginners only)
Remote Glow Plug
Extension
TOOLS REQUIRED FOR ASSEMBLY
Screw Driver
Needle Nose Pliers
Instant Glue
Hobby Knife
Tools for Assembly
The Raptor 60 design has a low parts count. It is designed for easy maintenance using standard hobby tools. Please only use
genuine Thunder Tiger parts. Please keep the model clean and well tuned. It will provide you with long lasting pleasure in return.
OTHER ITEMS REQUIRED
Battery
1200mAh
Gyro
High Speed/Torque Servo x 5
Glow Fuel(15%-30%)
Fuel Pump
Rubber Band
(Included)
Glow Plug Wrench
5.5mm Wrench
7mm
Blue Loctite
Switch harness
12V Electric starter
Extended 6mm Hex
Starting Tool
Foam
Nipper
Ball Link Pliers
Epoxy
Grease
2
Engine System
Use a high quality 60 to 75 size 2-
stroke model helicopter engine, such
as the Thunder Tiger TT70H Pro, OS
61 SX WC, YS 61 ST II, or equivalent.
Please beware, some engine will not
fit because of its shape and size. The
Raptor 60 kit comes with a cooling
fan hub to fit the TT 70H pro, OS 61
SX and the YS 61 ST II.
We recommend a high quality muffler
or tuned exhaust system designed to
fit on the left side of the model.
Rotor Blades
It is extremely important to use main
rotor blades that are of high quality
and suit your flying style. If fiberglass
or carbon graphite blades are used,
their blade length should be between
660 and 690 mm. Blade weight should
be between 170 and 200 grams.
Recommed P/N TTR 3836
Starter System
The Raptor 60 engine is started using
a RC airplane electric starter with a
6 mm shaft extension. The 6 mm
starter extension is available from
Thunder Tiger, part number TTR 3801.
Use a strong high torque 12 volt
electric starter that is designed for
model use.
4-way Wrench
Scissors
Hex Wrench
(Included)
Socket Drivers
Metric
5.5mm
7mm
8mm
5.5mm
7mm
8mm
10mm
Advertisement
Table of Contents
