Table of Contents
Advertisement
5-6
Installation of Rotor Blade
No. Material No. Description
1
BV0383
Main Rotor
2
BK0446
M5x35 Rotor Bolt
3
HMM5Z
M5 Locknut
See wood blade modification in page 41.
Raptor 60 Blade Grip Spacer for 12 mm Blade Roots
Main Rotor Grip
Since there are many after-market carbon fiber and fiberglass
Qty
blades on the market now with a 12 mm thick blade root, Thunder
2
Tiger has now added a complimentary Blade Grip Spacer with
2
each Raptor 60 Kit. This spacer is specially designed for carbon
2
fiber or fiberglass blades with a 12mm thick blade root. The
spacer SHOULD NOT be used on any brand or type of wood
rotor blades, including the stock Raptor 60 wood blades because
the space do not provide strength: it is just a spacer. To install
the spacer, simply bend it over and put it in place. If the blade
root is more than 12 mm, then do not use this spacer and use
the washer that comes with your blades.)
Thunder Tiger provides a good selection of high performance
680mm carbon fiber rotor blades (TTR 3836). Please check
your local dealer for more information on upgrading your rotor
blades.
Rotor Spacer
35
(2)
(1)
(3)
BAG M
Advertisement
Table of Contents
