Wash Out Subassembly; Main Gear Subassembly - THUNDER TIGER RAPTOR Assembly Manual

1-6-1 Wash Out Subassembly

No. Material No. Description
1 HMJ2-10N M2x10 Self-Tapping Screw
2 HMC3-12B M3x12 Socket Screw
3 HMV840ZZ d4xD8x3 BRG
4 BK0341 Wash Out Base
5 BK0342 Flybar Control Lever
6 BK0343 Wash Out Link
7 BK0075 Link Ball 4.8
8 BK0409 Collar d3xD4x7
9 BK0412 Pin 2x14.5
Insert the pin into the Washout Link. If the link is tight
on the mixing arm, then gently squeeze the Link at the
pin position with a pliers while the Link is attached to
the Arm. This will make the hole in the Link slightly
bigger. You may want to add just a tiny drop of Loctite
on the inside and outside of BK0409 Collar which will
help give a completely slop free control system. Do not
let the Loctite seep into the bearing. Adjust the tightness
of the M3x12 bolts so the mixing arms can move freely
but without wobble or racheting the ball bearings.
1-6-2 Swash Plate Subassembly
No. Material No. Description
1 HMF2-8N M2x8 Philip Machine Screw
2 HMJ2-8N M2x8 Self-Tapping Screw
3 BV0421 Swash Plate
4 BK0075 Link Ball 4.8

1-6-3 Main Gear Subassembly

No. Material No. Description
1 BV0368 Auto Rotation Clutch
2 BK0420 Main Spur Gear 93
3 BK0357 Tail Drive Spur Gear 83
4 HMQ16 Retaining Ring
5 HMC3-8B M3x8 Socket Screw
6 BK0359 One Way Clutch Shaft
7 BK0613 One Way Clutch Reinforced Ring
8 HMC3-14B M3x14 Socket Screw
It is necessary to add grease inside the one way clutch before
your first flight. The clutch might lock up once grease is gone.
The one way clutch grease( PV0478) is recommended for this
lubrication.
Secured the reinforced ring in place. Please see the following
drawing.
Reinforced Ring
Qty
2
2
4
1
2
2
2
2
2
(1)
Add a tiny drop of thick CA glue at the tip of the M2x18 self-tapping
screw (No. 1) before screwing it into the Flybar Control Levers
(No. 5). Before installing the Flybar Control Lever (No. 5), please
add a small drop of Loctite on the M3x12 socket screw (No. 2)
and on the outside of the collar d3xD4x7 (No. 8).
Qty
4
4
1
8
Qty
1
1
1
1
4
1
1
1
Apply Grease
16
(4)
(5)
(7)
(3)
(8)
(3)
(4)
(7)
(6)
(9)
(2)
(1)
(2)
(4)
(6)
(8)
(5)
(2)
(1)
(3)