Adding Detailed Information To A Service Template - Palm PalmTM ZireTM Handheld Handbook

Adding detailed information to a service template

If you are using one of the predefined service templates, you probably only need
to enter your username and telephone number. If you are creating a new service
template, you may need to provide additional information to your ISP or dial-in
server. You use the Details dialog box to add additional information to a selected
service template.
To select a connection type:
Tap the service field.
1.
Tap Details.
2.
Tap the Connection type pick list and select one of the following connection
3.
types:
PPP
SLIP
CSLIP
NOTE
Service Provider or your System Administrator for the correct connection type.
Idle timeout
The Idle timeout setting defines how long your handheld waits before dropping
the connection with your ISP or dial-in server when you switch out of a TCP/IP
application.
Point-to-Point protocol
Serial Line Internet Protocol
Compressed Serial Line Internet Protocol
If you are not sure, try PPP; if that doesn't work, ask your Internet
Network preferences and TCP/IP software
Select connection type
157