Performing Cable Hotsync Operations - Palm PalmTM ZireTM Handheld Handbook

Click Conduit Settings.
5.
Click the direction in which you want to write data, or click Do Nothing to skip
6.
data transfer for an application.
NOTE
HotSync operation. Thereafter, the HotSync Actions revert to their default
settings. To use a new setting on an ongoing basis, click Make Default.
Thereafter, whatever you selected as the default setting is used for HotSync
operations.
Click OK.
7 .
Repeat steps 4 through 7 to change conduit settings for other applications.
8.
Close the Conduit Settings window.
9.

Performing cable HotSync operations

The simplest way to synchronize data is to perform a direct HotSync operation by
connecting your handheld to the cable, turning on your handheld, and tapping the
Favorite icon
IMPORTANT
connection.
Performing a HotSync operation for the first time: Windows
When you installed Palm Desktop software, you entered a username. This
username is the connection between your handheld and your computer. The first
time you synchronize your data, you are prompted to enter your username in
Palm Desktop software. After you enter this information and synchronize, the
HotSync Manager recognizes your handheld and doesn't ask for this information
again.
If you are a System Administrator preparing several handhelds for a group of
users, you may want to create a user profile. See
this chapter before performing the following steps.
Changing the HotSync setting from the default affects only the next
.
You must perform your first HotSync operation with a local, direct
Performing cable HotSync operations
"Creating a user profile" later in
127