Linksys NMH300 Quick Installation Manual page 6

7.
You can use a new or previously
used hard disk drive. If you use a
previously used hard disk drive, all
data on that drive will be erased
during installation. If you want to
keep any of the data, back up the
drive before you continue with
the Setup Wizard.
Click Next.
8.
The following steps will describe
how to install the hard disk drive.
Click Next.
9.
If the Media Hub is powered on,
press and hold down the Power
button until the LED turns off.
Click Next.
10.
Disconnect the power adapter
from the back of the Media Hub.
Click Next.
4
Media Hub