D 12800 Leaf Module Guidelines; Single Management Module; Dual Management Modules - Intel True Scale Fabric Switches 12200 Installation Manual

12000 Series Switches
Appendix D 12800 Leaf Module Guidelines
This section details the general guidelines for populating each 12800-series switch.
Each switch has:
• Two Management Module (MM) slots with a corresponding management leaf slot.
The minimum requirement for each switch is one leaf module per management module.
This leaf must be installed in the corresponding management leaf slot. If the
management leaf slot(s) is not installed, then the MM cannot communicate or manage
the chassis through the inband IB connection.
Note: The mechanical release latches (MRL) on the MM and the management leaf slots need
to be secured and enabled to function properly.
After populating the management leaf slots, the user may install additional leaf
modules in any of the leaf slot locations. Most users will generally install leaf modules in a
left-to-right, bottom-to-top pattern. The details for each 12800-series switch are as
follows:
D.1 12800-040
D.1.1

Single Management Module

• MM slot: M202/Leaf module management slot: L101.
D.1.2

Dual Management Modules

• MM slot: M202/Leaf module management slot: L101.
• MM slot: M201/Leaf module management slot: L102.
D.2 12800-120
D.2.1 Single Management Module
• MM slot: M208/Leaf module management slot: L101.
D.2.2 Dual Management Modules
• MM slot: M208/Leaf module management slot: L101.
• MM slot: M207/Leaf module management slot: L102.
D.3 12800-180
D.3.1 Single Management Module
• MM slot: M212/Leaf module management slot: L101.
D.3.2 Dual Management Modules
• MM slot: M212/Leaf module management slot: L101.
• MM slot: M211/Leaf module management slot: L102.
July 2015
Order Number: G91928004US
True Scale Fabric Switches 12000 Series Hardware
Installation Guide
89