Setting up the Machine for Sending Data to a File Server
Follow the setup procedure described here to set up the machine for sending data
to a file server (FTP or a shared folder).
IMPORTANT
To send data to a file server with the imageRUNNER 2545/2535/2530/2525/2520, the
1
Send function must be activated with the optional Color Send Kit-Y1.
NOTE
For details about system requirements, see "Sending Data to a File Server," on
p. 1-16.
1
2
3
1-22
Setup Procedure
Connect the machine to a network
Follow the procedure described in "Connecting the Machine to a Network," on p. 1-19.
Set up the machine according to your network environment (See Chapter 3,
"Setting up the Machine for Your Network Environment.")
Any of the following can be used to specify the settings:
• The Machine's control panel (Additional Functions menu)
• The Remote UI (via a web browser)
Set up a file server
• To send data to an FTP server:
See "Setting File Server (FTP)," on p. 5-7.
• To send data to a shared folder:
See "Setting File Server (File Sharing)," on p. 5-18.