Printer Connection Method (Lpd/Raw); Installing A New Driver; Changing The Port After Installing The Driver - Canon imageRUNNER 2545i System Settings Manual

NOTE
If Windows 2000/XP/Vista/7/Server 2003/Server 2008 or Mac OS X (10.4.9 or later) is
on your network, you can set up a print server for more efficient management of
network printers. Once a print server is set up, it can manage the print jobs. Also, by
setting up a driver for the print server, the printer driver can be installed in each
computer via the network.

Printer Connection Method (LPD/Raw)

The procedure described in this section is for specifying the port setting.
NOTE
If you are using Windows Vista, a dialog box may be displayed while you are
performing the procedure. In this case, enter a user name and password. For more
information, see the manuals provided with the operating system.

Installing a New Driver

Install the driver according to the procedures indicated below, found in the manual
for each driver. For Macintosh, see the Mac Printer Driver Installation Guide.
• If you want to use the UFRII LT/PCL/PS printer driver:
See the installation procedures in the Printer Driver Installation Guide. (See
Chapter 3, "Accompanying CD-ROMs," in the User's Guide.)
• If you want to use the fax driver:
See the installation procedures in the Fax Driver Installation Guide. (See Chapter
3, "Accompanying CD-ROMs," in the User's Guide.)
NOTE
On Windows, the default printing protocol will be Raw if the driver has been installed
according to the Printer Driver Installation Guide. If you wish to use LPD as the
printing protocol, change the settings after the driver is installed. For details, see
"Changing the Port after Installing the Driver," on p. 5-3.

Changing the Port after Installing the Driver

NOTE
For Macintosh, change the network configurations of your printer in the [Print & Fax]
setting in [System Preferences]. See the Mac Printer Driver Installation Guide.
1
Open the printer properties dialog box.
● For Windows 2000
❑
Click on the [Start] menu ➞ point to [Settings] ➞ click [Printers].
Setting up a Computer for Printing/Sending a Fax
5
5-3