Config - Brady BMP 61 User Manual

Setup

Config

The following settings can be found under the Config menu in the Setup function.
Figure 1-8. Printer configuration in Setup settings
The Shut Off Delay sets the auto-off time-out. This refers to the number of
minutes of inactivity after which the printer automatically shuts off.
When using the AC adapter, power is constant so there is no drain on the battery.
In this case, you can turn off the Shut Off Delay by choosing No Shut off (AC).
The Brightness setting increases or decreases the brightness of the display
screen.
The Firmware version currently installed on your printer can be found in the lower
left corner of the screen.
®
BMP 61 Label Printer User's Manual 1-45