Osd; Main Osd Menu - BenQ DX550 User Manual Manual

Resetting Lamp Timer
If replacing the lamp after 1500 hours of operation, please carry out the following operation within 10
minutes of powering on.

OSD

Main OSD Menu

Press the "Menu" key and the main OSD menu
structure will display as shown at right hand (Fig.
21). Whenever AV box is attached, 4 sub-pages
will display in the menu: Display page, Image page,
Control page, and Source page. However if input is
from PC and no AV box is attached, Source page
will not display in the menu.
Press the "Menu" key again to enter Display page
items, or press "3" (KEYSTONE-) or "4"
(KEYSTONE+) to select sub-pages. (The main
OSD menu will automatically disappear if a key is
not pressed within 10 seconds).
Press the "Exit" (AUTO) button to leave the
current sub-page, and press "Exit" (AUTO) button again to leave the main OSD menu (at the same
time the settings are saved).
Input status PC input without AV box
Subpage Display
Image
Control
Downloaded From projector-manual.com BenQ Manuals
OSD
PC input with AV box
Display
Image
Control
Source
FUNCTION
Press the MENU button into OSD menu, and
use "4" (KEYSTONE+)
(KEYSTONE-) to select the Control page.
Then press the Menu button again to highlight
the Lamp item.
Press "4" (KEYSTONE+)
(KEYSTONE-) buttons, the lamp usage time will
display on the bottom of the screen and can be
adjusted.
•
Use the "4" (KEYSTONE+) or
(KEYSTONE-) buttons to select the "Reset"
item and press the "MENU" to reset the
usage time.
•
After reset the usage time, press "EXIT"
(AUTO) to save and exit.
Figure 21 Main OSD menu
Video input with AV box
Display
Image
Control
Source
User's Manual
or "3"
or "3"
"3"
Operation 15