Siemens Gigaset SL 100 User Manual page 77

Using several handsets
◆
◆
i
◆
◆
Activating the room monitor function and entering the "call to" number for
the first time
v
s
Add. Features
Room Monitor
r
s
R[RRRRRRRRRRRRRRRRRRR]
Edit
either ...
[RRRRRRRRRRRRRRRRRRRRR]
INT
s
OK
or ...
~
à
Save Entry
s r
[RRRRRRRRRRRRRRRRRRRRR]
Save
76
If you redirect your room monitor to an external number, then you
should tell that number's owner.
The room monitor's call to an external phone number stops after
about 90 seconds, to an internal number (handset) it stops after
about 180 seconds (depending on the base station).
The room monitor function severely curtails the handset's operating
time. You can leave the handset in the baby's room in the charging
unit. This will avoid the battery going flat.
The room monitor function can also be used in Walk and Talk mode.
Step 1: Open the entry field for the room monitor:
Open the menu.
Select the menu item and confirm.
OK
Confirm. The input field is opened.
OK
Step 2: Activate the room monitor:
In the line Room M.: select On.
Step 3: Enter the telephone number:
Scroll to the Call to: line and press the display key.
The input field for the telephone number is opened.
Enter an internal number as the "call to" number:
Press the display key.
Select the handset and confirm.
Enter an external number as the "call to" number:
Enter the telephone number.
Press the display key.
Confirm. The entry is stored.
OK
Step 4: Set the sensitivity:
You can scroll to the Level: line if you want to set the
sensitivity for the noise level (Low or High).
Press the display key. The room monitor function is
now activated.