Specifications - Siemens Gigaset SL 100 User Manual

Specifications

Recommended battery
Lithium-Ion (LiIon), 700 mAh
(Valid when these operating instructions were printed)
The device is supplied only with a recommended battery.
Handset operating times/charging times
Capacity
(mAh)
700
These operating and charging times apply only when using the recommended battery.
Power consumption
In idle status: SL 100 approx. 1.6 Watt and SL 150 approx. 2.2 Watt.
◆
During the call: SL 100 approx. 2.0Watt and SL 150 approx. 2.5 Watt.
◆
General Specifications
Feature
DECT standard
GAP standard
No. of channels
Radio frequency range
Duplex method
Channel grid
Bit rate
Modulation
Language code
Transmission power
Range
Power supply/Base station
Environmental conditions for operation
Dialling mode
Recall
Dimensions/Base station
Dimensions/Handset
Weight
Standby time
(hours)
min. 250 (10 days)
Value
is supported
is supported
60 duplex channels
1880–1900 MHz
Time multiplex, 10 ms frame length
1728 kHz
1152 kbit/s
GFSK
32 kbit/s
10 mW, average power per channel
up to 300 m outdoors, up to 50 m indoors
230 V ~/ 50 Hz
+5 °C to +45 °C;
20 % to 75 % humidity
DTMF (tone dialling)/DP (dial pulsing)
250 ms
Gigaset SL 100/SL 150: 143 x 118 x 50 mm (L x W x H)
114 x 47 x 22 mm (L × W × H)
Base station SL 100: 167 g and Base station SL 150:
174 g; handset with battery cell: 81 g
Calling time
(hours)
approx. 15
Appendix
Charging time
(hours)
approx. 2.5
97