Siemens Gigaset SL 100 User Manual page 95

Appendix
What has happened if ... Possible cause
... I hear an error tone (falling
tone sequence) when keying
an input?
... I cannot listen to the net-
work mailbox?
... the calls list does not indi-
cate a time for a message?
... the answering machine
says "PIN is incorrect" during
remote operation?
... the answering machine
does not record any messages
or has automatically switched
over to "announce only"?
... voice commands do not
work?
94
The action has failed or the input
is incorrect.
Your phone system is set for
pulse dialling.
Date/time are not set.
The entered system PIN is incor-
rect or still set to 0000.
Its memory is full.
You are too far away from the
handset.
The noise level in the room is too
high.
Possible solution
Repeat the procedure; watch
the display and if necessary
refer to the operating instruc-
tions.
Set your phone system to tone
dialling (page 92).
Set the date/time (page 15).
Enter the system PIN again or
set a PIN that is different from
0000 (page 87).
Delete old messages
Play back new messages and
delete.
The handset should be around
20 cm (8 inches) away from
you.
Record your voice pattern in
quieter surroundings.