Procedure
The STRIKE 1 comes with a double-bracketed yoke to which you can either attach the included Multi-
Bracket or simply attach mounting clamps directly. You must supply the mounting clamps. Make sure the
clamps are capable of supporting the weight of this product. Use at least one mounting point per product.
For the CHAUVET Professional line of mounting clamps, go to http://www.trusst.com/products.
Mounting Diagram
• Secure all safety cables to the mounting surface, NOT the Multi-Bracket.
• Do not mount more that 4 products vertically from one mounting point.
• Ensure any mounting surface used is capable of supporting the weight of all
products being mounted.
Page 8 of 17
Mounting Clamp
Safety Cable
Multi-Bracket
Spacer Bar
Spacer
Secure the safety
cable using the
passageway on the
back of the product.
S
ETUP
STRIKE 1 User Manual Rev. 2