Palm Rest - Dell Inspiron 510m Service Manual

Hide thumbs Also See for Inspiron 510m:

Table of Contents

Back to Contents Page

Palm Rest

Dell™ Inspiron™ 510m Service Manual

CAUTION:

Before performing the following procedures, read the safety instructions in your Owner's Manual.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

1. Follow the instructions in

"Preparing to Work Inside the

2. Remove the keyboard.

NOTICE:

You must remove the display assembly before you remove the palm rest; the display hinges pass through the back of the palm rest.

3. Remove the

display

assembly.

4. Remove the three M2.5 x 5-mm screws labeled "circle P" from the top of the palm rest.

5. Remove the M2.5 x 5-mm screw labeled "M2.5x5" from the metal shield.

1 M2.5 x 5-mm screws labeled "circle P" (3)

2 top of the palm rest

3 M2.5 x 5-mm screw labeled "M2.5x5"

6. Turn over the computer and remove the 13 M2.5 x 8-mm screws.

Computer."

Table of Contents