Display Bezel; Display Panel - Dell Inspiron 510m Service Manual
Hide thumbs
Also See for Inspiron 510m:
- Owner's manual (188 pages) ,
- Setup manual (88 pages) ,
- Service manual (82 pages)
Table of Contents
Advertisement
1 M2 x 5-mm screws (6) 4 display panel
2 display bumpers (6)
5 top cover
3 display bezel
6 M2 x 5-mm screws (8)
Display Bezel
CAUTION:
Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1. Follow the instructions in
"Preparing to Work Inside the
2. Remove the keyboard.
3. Remove the
display
assembly.
4. Use a plastic scribe to pry the six display bumpers out of the screw holes located on the front of the bezel.
5. Remove the six M2 x 5-mm screws located on the front of the bezel.
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to the bezel.
6. Starting at the bottom of the display panel (by the DELL™ logo), use your fingers to separate the bezel from the top cover by lifting the inside edge of
the bezel away from the top cover.
Display Panel
Computer."
Advertisement
Table of Contents
