Placing The Headset On Your Ear; Using The Detachable Earpad - Jabra BT300 User Manual

Placing the Headset on your Ear

In order to wear the headset please follow these instructions:
1. Put the earhook in its open
position (90° away from
the headset).
2. Place the Ear hook over your ear
3. Close the earhook so the
receiver / speaker is close to
your ear.
4. The microphone will then be
pointed towards your mouth.
8
1

Using the Detachable EarPad

The EarPad supplied with the JABRA BT300 offers both additional comfort when
wearing, and also reduces outside noise to your ear when you are on a conversation.
However, if you feel the headset would have a better fitting and you need to remove
the EarPad then follow these instructions:
1. Firmly hold the headset.
2. Take hold of the EarPad and
pull away from the headset.
3. The EarPad will detach from
the main unit.
4. To replace the EarPad simply
position the plastic surround
in place on the headset.
5. Push the EarPad firmly
until you hear a 'click' .
6. The EarPad is now
attached to the unit
and ready to wear.
9