Dodge SRT Hellcat Owner's Manual page 332

330 UNDERSTANDING YOUR INSTRUMENT PANEL
While in Valet Mode the following vehicle configurations
are set and locked to prevent unauthorized modification:
• Engine limited to the lowest power output state.
• Transmission locks out access to first gear and up-
shifts earlier than normal.
• Traction, Steering, and Suspension are set to their
STREET settings.
• Steering wheel paddle shifters are disabled.
• The Drive Mode interface is not available. Pressing the
SRT button on the touchscreen will display the unlock
keypad.
• The ESC Off button is disabled.
• The Launch Control button is disabled.
Valet Mode Deactivation
To exit Valet Mode you must enter the same 4 digit PIN
that was used to enter the mode. The unlock keypad can
be accessed by either pushing the SRT button on the
faceplate, or pressing the "Valet Mode Active – Press
Here to Exit" button on the touchscreen.