Dodge SRT Hellcat Owner's Manual page 329

"Launch RPM Set-Up" to set the holding RPM. Launch
Mode can be turned on or off by either pushing the
Launch Control button on the instrument panel switch
bank (if activated), or by pressing the "Cancel Launch
Mode" button on the touchscreen.
NOTE: Launch RPM Set-Up cannot be accessed unless
Launch Mode is deactivated.
UNDERSTANDING YOUR INSTRUMENT PANEL 327
Launch RPM Set-Up
To adjust the Launch RPM, drag the slider bar or press
the arrows on the touchscreen to adjust the holding RPM.
The launch RPM limit is between 1500 and 3500 RPM.
For further information refer to "Drive Modes" in "Start-
ing and Operating".
4