Motorola CB3000 User Manual page 89

d. Click the ICMP Ping Test
Figure 5.12 Ping Test with Associated Device Status Example
Use the results to determine whether the device association should be maintained or replaced by a
device association providing better network coverage and signal strength.
• Ping the Host – The CB3000 can verify its link with its host by sending WNMP ping packets to the host's
IP address. To conduct an ICMP ping test with the CB3000's host:
a. Enter the IP address of the host.
b. Specify the length of each data packet transmitted to the target device during the test. This
increment is defined in bytes. If you don't know, enter a large arbitrary amount like 500.
c. Specify the number of ping packets to transmit.
d. Click the Comm Connection Test
Figure 5.13 Ping Test with Host Status Example
e. Use this information to determine whether the host connection should be maintained or replaced by
a host connection providing better connectivity with the CB3000.
button. Results of the ping test displays in the
button. Results of the test displays in the
5-15
Administrative Options
Status box.
Status box.