Motorola CB3000 User Manual page 50

3-26 CB3000 Client Bridge User's Guide
Validate Server
Certificate
WPA2 Algorithm
WPA2 User ID
WPA2 Password
Clean User ID and
Password
WPA2 Root Certificate /
WPA2 Root Certificate
Import
Apply
Reset
Cancel
5. Click Apply
Check to force the CB3000 to validate the Server Certificate.
Select the WPA2 algorithm to use:
• TKIP – Defines a 'wrapper' that goes around an existing WEP encryption
algorithm. TKIP comprises the same encryption engine and RC4 algorithm
defined for WEP. However, the key used for encryption in TKIP is 128 bits
long.
TKIP changes the key used for each packet. The key is created by mixing
together a combination of things, including a base key (called a Pairwise
Transient Key), the MAC address of the transmitting station, and the serial
number for the packet.
• CCMP (AES) – Utilizes an Advanced Encryption Standard (AES) 128-bit
key algorithm with a 48-bit initialization vector (IV) for replay detection.
The Counter Mode (CM) component of CCMP is the algorithm providing
data privacy. The Cipher Block Chaining Message Authentication Code
(CBC-MAC) component of CCMP provides data integrity and
authentication.
• Both – Select this option to enable CB3000 to support devices that use
both TKIP and CCMP algorithms. Use this option when the number of
devices is large.
The User ID for authentication.
The WPA2 user password.
Check to prevent the CB3000 from saving the WPA user name and its
password in its cache.
The WPA2 Root Certificate. The Root Certificate can be uploaded to the
device by:
• Pasting the certificate in the
the certificate, click the
• By providing the path to the file containing the certificate in the
text box. Use the
where the file can be selected. To upload the file containing the
certificate, click the
Note: These fields are only enabled when
option is enabled.
Use the Apply
Use the Reset
Use the Cancel
screen.
to apply and save the settings, or
Paste Root Certificate
Apply button at the bottom of the screen.
Browse button to display the Open File dialog box from
Apply Uploaded File
button to update all the changes to the device.
button to reset the fields in this screen to their default values.
button to cancel any changes made to the WPA2 PEAP
Cancel to exit the screen without saving your changes.
text area. To upload
Import
button.
Validate Server Certificate