Motorola CB3000 User Manual page 73

.
2. Select either
configured.
• Manual Time Setting
the Local Time Settings
• Local Time Settings
there are no servers available, the system time displays the CB3000 uptime. The time does not
automatically update. Click the
• Enable NTP on CB3000
server entered within the
• Preferred time Server
• First Alternate time Server
server to use for time synchronization if the primary NTP server goes down.
• Second Alternate time Server
server for the greatest assurance of uninterrupted time synchronization.
3. Select the Enable Wireless Network Time Adoption on CB 3000
obtain its system time from its associated switch.
• UTC Settings
time with its associated switch.
4. Click Apply
Figure 4.11 Time Settings
Manual Time Setting or
– If selected, the CB3000 system time is based on the time entered within
fields.
– Current time based on the CB3000 system clock. If NTP is disabled or if
– If selected, specifies the CB3000 time is based on the specified NTP
Server Configuration
– IP address and port of the primary NTP server. The default port is 123.
– Optionally, specify the IP address and port of an alternative NTP
– Define the Hours
to save the settings, or Cancel
Enable NTP on CB3000
Refresh button to update the date and time.
fields.
– Optionally, specify the IP address and port of yet another NTP
and Minutes intervals the CB3000 uses to synchronize its system
to exit the screen without saving your changes.
Management Options
to specify how CB3000 system time is
checkbox to enable the CB3000 to
4-15