Motorola CB3000 User Manual page 61

Table 4-1. Wireless Statistics Screen Details (continued)
Statistic
Power The power level in dbm for RF signal strength.
a
Reset roam count Click this button to reset the roam count.
Traffic Panel Details
Pkts per second The
the radio. The
received. The
transmitted.
Throughput Use this information to assess whether the current throughput is sufficient
to support required network traffic. The
throughput on the radio. The
Mbps for packets received. The
for packets transmitted.
Avg. Bit Speed Displays the average bit speed in Mbps for the radio, considering both
transmitted and received packets.
Approximate RF Approximate RF utilization of the CB3000 radio. This value is calculated as
Utilization the throughput divided by average bit speed.
% Non-unicast pkts Percentage of total radio packets that are non-unicast. Non-unicast
packets include broadcast and multicast packets.
RF Status Panel Details
Avg MU Signal Average RF signal strength in dBm for all devices interoperating with the
CB3000.
Avg MU Noise Average RF noise for all devices interoperating with the CB3000 radio. If
the noise level is excessive, consider moving the MUs closer to your
CB3000, or to an area with less conflicting network traffic.
Avg MU SNR Average Signal to Noise Ratio (SNR) for all devices interoperating with the
CB3000 radio. The Signal to Noise Ratio is an indication of overall RF
performance on your wireless network.
Error Panel Details
Avg Num. of Average number of retries for all devices interoperating with the CB3000
Retries radio.
% Gave Up Pkts Percentage of packets that the CB3000 gave up on for all devices
interoperating with the CB3000 radio.
% of Percentage of undecryptable packets for all devices interoperating with
Undecryptable Pkts the CB3000 radio.
a. For CB3000 Client Bridge, the roam counter increments when the device moves from one AP to another
on the same channel. If the device has moved to a different AP on a different channel, the roam counter
is not incremented.
Description
Total column displays the average total packets per second crossing
Rx column displays the average total packets per second
Tx column displays the average total packets per second
Rx
Total column displays average
column displays average throughput in
Tx column displays average throughput
4-3
Management Options