Main Power And Energy Saver Key; How To Turn On The Main Power - Canon imageRUNNER ADVANCE C7260 Before Using

Main Power and Energy Saver Key

This section describes how to use the main power switch and the Energy Saver key.

How to Turn ON the Main Power

This section explains how to turn ON the main power.
IMPORTANT
• If the main power indicator on the control panel does not light even though the main power switch is ON, be sure to check the
breaker to see if it is OFF.
• If you want to turn OFF the main power and then back ON again, wait for at least 10 seconds after the main power indicator is
turned OFF before turning ON the main power.
NOTE
• The machine can receive and print documents from a personal computer when it is in the Sleep mode. I-fax and fax
documents can also be received while the machine is in the Sleep mode.
• You can shut down the machine from the Remote UI using the Remote Shutdown mode. For more information, see e-Manual
> Remote UI.
Make sure that the power plug is fi rmly inserted into the power outlet.
1
Do not connect or disconnect the power cord with wet hands, as this may result in electrical
shock.
If the Security Key is inserted into the machine, make sure that it is in the ON
2
positions (turn it to the right).
* Security Key
When using the machine, insert the security key into the main unit, and then turn it to the right.
*
43