3.
Using the Phillips head screwdriver, carefully fasten all four screws into the four tray slots. Do not overly
tighten the screws. Doing so can affect the integrity of the screw holes on the drive as well as the threads on
the screws.
4.
Repeat the process if you are adding more than one disk.
5.
Carefully insert the full drive tray into the empty Disk Slot 1. You will feel resistance when the drive tray is
most of the way in the bay. Gently push the drive tray handle firmly until you feel it snap into place. The
drive tray handle should be flush with the back of the enclosure.
6.
If you are adding more than one disk, please insert full drive trays into empty slots in the enclosure. Make
certain to follow the slot numbers. For example, the second disk should be inserted into Disk Slot 2, the third
disk into Disk Slot 3, etc.
7.
Use the drive lock tool to lock the drive(s) in place.
5. POWER ON AND INITIALIZE THE LACIE NAS
d2, 2big, and 5big Network 2 User Manual
16