Rebuilding Times
Rebuilding a protected RAID array takes many hours, depending on the capacity of the disks and your NAS'
available resources (concurrent tasks such as backups or torrent downloads will slow rebuilding). Changing to
an unprotected RAID mode (ie RAID0) takes less than a minute. Note that data is accessible during rebuilding.
ABOUT RAID MODES
Refer to the table below for an overview of the different RAID modes, and see the descriptions for details. Note
that this information is also explained in the RAID Setup Wizard on the Dashboard (see above for details).
RAID Mode
Capacity Protection Product
RAID 0
100%
RAID 1
1
50%
RAID 5 (default) 80%
RAID 5+Spare
60%
RAID 6
60%
1
RAID 1 is only available for the 5big if there only two disks are installed.
d2, 2big, and 5big Network 2 User Manual
Factory Default
2big/5big 2big
2big/5big –
5big
5big
5big
–
5big
–
109