Ricoh Pro 8100s User Manual page 196

9. Troubleshooting
Messages
"Collate has been cancelled."
"Exceeded the maximum unit
count for Print Volume Use. The
job has been cancelled."
"Exceeded the maximum
number of multi-sheet fold. The
job has been cancelled."
"Fold is not available with the
settings. The job has been
cancelled."
"Receiving data failed."
"Sending data failed."
"The selected paper size is not
supported. This job has been
cancelled."
"The selected paper type is not
supported. This job has been
cancelled."
"Z-fold error."
188
Causes
Collate was canceled.
The number of pages the user is
permitted to print has been
exceeded.
The maximum number of Multi-
sheet Fold was exceeded.
Fold function is not available
with the current settings.
Data reception was aborted.
The machine received a
command to stop transmission
from the printer driver.
Job Reset is automatically
performed if the specified paper
size is incorrect.
Job Reset is automatically
performed if the specified paper
type is incorrect.
Z-folding was canceled.
Solutions
Turn off the power, and then
back on again. If the message
appears again, contact your
service representative.
For details about Print Volum.
Use Limit., see Security Guide
.
Specify fewer sheets for the
Multi-sheet Fold function. For
details about the maximum
number of Multi-sheet Fold, see
"Specifications for Multi-Folding
Unit", Maintenance and
Specifications .
Check the paper settings. For
details about the limitations of
the Fold function, see "Fold",
Print .
Resend the data.
Check if the computer is
working correctly.
Specify the correct paper size,
and then print the file again.
Specify the correct paper type,
and then print the file again.
Check the tray, paper
orientation, print orientation,
and Z-fold settings again.