Back to Contents Page
Speakers
Dell™ Inspiron™ 9200
Removing the Speakers
Replacing the Speakers
Removing the Speakers
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1. Follow the instructions in
"Before Working Inside Your
2. Remove the
hinge
cover.
3. Remove the keyboard.
4. Remove the
display
assembly.
5. Remove the
palm
rest.
NOTICE:
Handle the speakers with care to avoid damaging them.
6. Remove the four M2.5 x 6-mm screws from the speakers (two on each speaker).
7. Gently remove the speakers.
8. Disconnect the speaker connector from the system board connector.
1 M2.5 x 6-mm screws (4)
2 speakers
3 speaker connector
Replacing the Speakers
1. Connect the speaker connector to the system board connector.
2. Gently align the speakers on the speaker connector.
3. Replace the four M2.5 x 6-mm screws to secure the speakers in place (two on each speaker).
Computer."