Removing The Palm Rest - Dell Inspiron 9200 Service Manual
Hide thumbs
Also See for Inspiron 9200:
- Owner's manual (174 pages) ,
- Service manual (116 pages) ,
- Getting started manual (65 pages)
Table of Contents
Advertisement
Back to Contents Page
Palm Rest
Dell™ Inspiron™ 9200
Removing the Palm Rest
Replacing the Palm Rest
Removing the Palm Rest
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1. Follow the instructions in
"Before Working Inside Your
2. Remove the
hinge
cover.
3. Remove the keyboard.
4. Remove the
display
assembly.
5. Remove the seven screws labeled "P" from the top side of the palm rest.
NOTE:
The screw locations may vary slightly from the image below.
1
top side screws (6)
6. Remove the
coin cell
battery.
NOTE:
The instructions below assume that the optical
7. Turn over the computer and remove the eleven screws from the bottom of the palm rest.
Computer."
- Quick Links:
- Removing the Hard Drive
Hide quick links:
Advertisement
Table of Contents
