Using The Remote Ip Device; Starting A Remote Session - Belkin OmniView F1DP101Mea User Manual

Using the Remote IP Device

Starting a Remote Session

To start a remote session:
1.
At a client computer, open Internet Explorer (version 6.0 or above) and
type the IP Device's IP address (https:// IP address).
Note: If you are using Windows Vista, you must run Internet Explorer in
administrator mode. In order to run Internet Explorer in administrator mode,
right-click on Internet Explorer and select "Run as administrator".
2.
When the Login screen appears, type in your user name and password,
and click
password is "SMBremote" (both are case-sensitive).
3.
If it is your first time connecting, you will be prompted to install the
Belkin certificate and the Microsoft ActiveX control. You must have
administrator privileges on your client computer to install the ActiveX
control.
4.
The screen of the currently selected server on the IP Device's will appear.
The quick-access toolbar will also appear on the right side of the screen.
5.
If the target server is currently being accessed by another user, a dialog
box will appear, giving you the option to "Take Over", "View Only", or
"Cancel" (see Fig. 10). Select one of these options. An administrator
has the option to take control over any server. A user only has this
option when the current session is run by another user, but not by an
administrator. The dialog box will not appear for a "view only" user.
. By default, the user name is "admin" and the
Fig. 10 Server-Access Dialog Box
1
2
3
4
5
6
7
8
9
UK-30