Advertisement
Quick Links
ORDERING REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS11 8JG
UK
Tel: Country Code:
08457 089 009
Fax: 0 (044) 113 387 7125
When ordering parts, please be prepared to give the following information:
• The MODEL NUMBER OF THE PRODUCT (PETL40510)
• The NAME OF THE PRODUCT (PROFORM
®
405S treadmill)
• The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual)
• The KEY NUMBER OF THE PART(S) (see the PART LIST and the EXPLODED DRAWING
attached in the centre of this manual)
• The DESCRIPTION OF THE PART(S) (see the PART LIST and the EXPLODED DRAWING
attached in the centre of this manual).
PROFORM is a registered trademark of ICON Health & Fitness, Inc.
Part No. 176860 R0801A
Printed in Canada © 2001 ICON Health & Fitness, Ltd.
Model No. PETL40510
Serial No.
Write the serial number in the
space above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
08457 089 009
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS11 8JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Class HC Fitness Product
Visit our website at
www.proform.com
Advertisement
Related Manuals for Pro-Form 405 S PETL40510
Summary of Contents for Pro-Form 405 S PETL40510
-
Page 1: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd. Unit 4 Revie Road Industrial Estate Revie Road Beeston Model No. PETL40510 Leeds, LS11 8JG Serial No. USER'S MANUAL Write the serial number in the space above for future reference. -
Page 2: Table Of Contents
SUGGESTED STRETCHES TABLE OF CONTENTS The correct form for several basic stretches is shown in the draw- ings at the right. Move slowly as you stretch—never bounce. IMPORTANT PRECAUTIONS ............. 2 BEFORE YOU BEGIN . -
Page 3: Conditioning Guidelines
CONDITIONING GUIDELINES 15. Never start the treadmill whilst you are You must be able to safely lift 20 kg (45 lbs.) standing on the walking belt. Always hold the in order to raise, lower, or move the treadmill. Aerobic Exercise handrails whilst using the treadmill. -
Page 4: Before You Begin
PROBLEM: The walking belt slows when walked on BEFORE YOU BEGIN SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm (14-gauge) cord that is no longer than 1.5 m (5 ft.). Thank you for selecting the PROFORM 405S tread- please call our Customer Service Department at ®... -
Page 5: Assembly
MAINTENANCE AND TROUBLE-SHOOTING ASSEMBLY Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and Assembly requires two persons. Set all parts in a cleared area and remove the packing materials; do not follow the steps listed. If further assistance is needed, please call our Customer Service Department. dispose of the packing materials until assembly is completed. - Page 6 3. With the help of a second person, hold the Console HOW TO MOVE THE TREADMILL Base (71) and the Right Handrail (32) in the position shown. Feed all of the excess Wire Harness (53) into Before moving the treadmill, convert the treadmill to the the Right Handrail, through the indicated bracket, and storage position as described on page 10.
-
Page 7: Operation And Adjustment
HOW TO SELECT KILOMETRES AND MILES OPERATION AND ADJUSTMENT Console The console can display distance and speed in either kilo- metres or miles. To change the unit of measurement, first THE PERFORMANT LUBE WALKING BELT UNPLUG THE POWER CORD. Next, remove the six screws attaching the console to the console base. - Page 8 Adjust the incline of the treadmill as desired. repeatedly until a mode arrow appears by the Speed Control Incline Control Displays desired mode symbol. Make sure that there is not a mode arrow by the scan symbol. To change the incline, press the top or bot- To reset the display, press the display tom of the incline con-...
- Page 9 PART LIST—Model No. PETL40510 R0801A REMOVE THIS EXPLODED DRAWING Key No. Qty. Description Key No. Qty. Description AND PART LIST FROM THE MANUAL Filter Choke Motor Pivot Sleeve Belt Guide Right Frame Guide Walking Platform Save this EXPLODED DRAWING and PART LIST for future reference. Left Handrail Isolator Handrail/Latch Screw...
-
Page 10: How To Fold And Move The Treadmill
EXPLODED DRAWING—Model No. PETL40510 R0801A 36 46...