Installation - Orion XTREME 600.4 Owner's Manual

INSTALLATION

The installation of all ORION components will determine the overall performance result. Improper installation will not only limit the performance of
your ORION system but also potentially compromise the reliability of this amplifier. To ensure proper sonic results and component reliability, please
refer to your Authorized ORION dealer for installation assistance or advice. If you decide to perform the installation yourself, read the entire
installation section of this manual before beginning installation.
TOOLS OF THE TRADE
Listed are the majority of the tools required to perform the installation. Having the proper tools will make the installation much easier. Some of
these tools are necessities. Some make the job much easier.
• marking pen
• electric drill with assorted drill bits
• utility knife
• Phillips and flat blade screw drivers
• pliers (standard and needle nose)
• wire brush or sandpaper for chassis grounding
• solder iron and solder
• heat shrink tubing
• nylon tie straps
• volt-ohm meter (optional)
• wire cutters
• wire crimpers
• wire strippers
page 18