Advertisement

LIMITED TWO MONTH CONSUMER WARRANTY AND ONE YEAR CONSUMER WARRANTY
WHEN PURCHASED AND INSTALLED FROM AUTHORIZED ORION DEALER
Electronics Limited Warranty
Please keep your original box. Orion warrants this product to be free from defects in materials and workmanship
under normal use for a period of TWO (2) months from the date of original
purchased and installed from an AUTHORIZED ORION dealer it is warranted for a period of ONE (1) Year from
the date of the original purchase receipt.
The ORIGINAL Receipt must be provided for all claims. Should service be necessary under this warranty for any
reason due to manufacturing defect or malfunction during the warranty period.
ORION will repair or replace (at its
discretion) the defective merchandise with equivalent merchandise with
equivalent merchandise at no charge.
Warranty replacements may have cosmetic scratches or blemishes.
Discontinued products may be replaced with more current equivalent products.
This warranty is valid only to the original purchaser and is non-transferable to any other person or party.
applicable implied warranties are limited in duration to a
beginning
with
the date of the original purchase at retail, and no warranties, whether express or implied,
shall apply to this product thereafter.
Some states do not allow limitations on implied warranties; therefore
these exclusions may not apply to you. This warranty gives you specific legal rights; however you may have
other rights that vary from state to state.
What to Do if you need Warranty or Service
Defective merchandise should be returned to your local authorized ORION
Assistance locating an authorized
dealer can be found at the products main website www.orioncaraudio.com
or by contacting ORION directly
at
1-855-475-6048.If it becomes necessary for you to return DEFECTIVE
merchandise directly to ORION,
call the ORION Customer Care
Merchandise Authorization (RMA) number. Package all defective items in the original container or in a package
that will prevent shipping damage. The shipping address and instructions will be given to you by our customer
care representative upon their issuing the RMA number.
The RMA number must be clearly marked on the outside of the package. Please return only defective compone-
nts. The return of functioning items increases your return freight charges. NON- DEFECTIVE items will not be
exchanged.You will be contacted by customer care advising you of such situations, and product will be returned
to you upon your payment of freight charges for the return of such product back to you.
Include a copy of the original receipt with the PURCHASE DATE clearly visible, and a ROOF of PURCHASE
statement listing the CUSTOMERS NAME, DEALER's NAME and INVOICE number, and product
Warranty expiration on items without
ROOF of PURCHASE
and manufacturing date code. FREIGHT on defectives products returned must be PREPAID by you or your
authorized dealer; items sent freight collect, or COD will be REFUSED.
What is not covered?
The warranty is valid only if the product is used for the purpose for which it was designed and does NOT COVER
the following;
Damage due to improper installation and sound settings, excessive or insufficient voltage
and use of inferior low grade wiring.
Subsequent Damage to other components
Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV Radiation.
Damage through negligence, misuse, accident or abuse. Repeated returns for the same damage may be
considered abuse.
Any cost or expense related to the removal or installation of product. No Installation Fee
Items previously repaired or modified by any unauthorized repair facility
Return shipping costs from ORION to you on non-defective items
Products with tampered or missing barcode labels
Products returned without a Return Merchandise Authorization (RMA) number
Freight Damage
The cost of shipping product to ORION, from you to Orion
Service performed by anyone other than Orion
Damage related to Acts of Nature, lightning, hurricanes, flood, tornadoes, and wildfires.
Products Sold outside of United States have NO WARRANTY expressed or implied
How long will it take?
ORION strives to maintain a goal of 7 day service for all electronics products (amplifiers, equalizers , electronic
crossovers, etc.) returns.
Delays may be incurred if lack of replacement inventory or parts is encountered.
Failure to follow these Steps may void your warranty. Any questions can be directed to the ORION Customer
Care Department at 1-855-475-6048.
2016
purchase receipt.
When
Any
period of the express warranty provided herein
dealer for warranty service.
number at 1-855-475-6048 for a Return
purchased.
will be determined from the type of sale
spikes,
reimbursements.
4 CHANNEL AMPLIFIERS
CB600.4
CB1000.4
CB1500.4
CB2000.4
CB3000.4
2 CHANNEL AMPLIFIERS
CB1200.2
CB2700.2
5 CHANNEL AMPLIFIERS
CB1500.5
CB2700.5
MONOBLOCK CLASS AB 2 OHM AMPLIFIERS
CB1000.1M2
MONOBLOCK CLASS D 1 OHM AMPLIFIERS
CB1000.1D
CB1500.1D
CB2500.1D
CB3500.1D
CB5000.1D
MONOBLOCK CLASS D 2 OHM AMPLIFIERS
CB1500.1D2
CB2500.1D2
CB300.2
CB600.2

Advertisement

Table of Contents
loading

Summary of Contents for Orion COBALT CB3000.4

  • Page 1 When purchased and installed from an AUTHORIZED ORION dealer it is warranted for a period of ONE (1) Year from the date of the original purchase receipt. The ORIGINAL Receipt must be provided for all claims. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction during the warranty period.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION Thank you for purchasing our car audio amplifier. These power amplifier has been designed to provide high quality performance with minimum Introduction..................2 maintenance. However, it's performance will only be as good as the care and quality of components with which is installed.
  • Page 3: Functions

    FUNCTIONS FUNCTIONS CB600.4/CB1000.4/CB1500.4/CB2000.4/CB3000.4 CB2700.2 LINE OUT LINE INPUT HPF LPF OUTPUT INPUT 0dB +18dB 50Hz 4KHz 40Hz 500Hz BASS BOOST GAIN INPUT MODE INPUT MODE GAIN BASS BOOST FULL INPUT MODE GAIN BASS BOOST MODE PHASE REMOTE 0dB +10dB +10dB FULL FULL 40Hz 500Hz...
  • Page 4: Operation

    OPERATION PRECAUTIONS This unit is designed for negative ground 12V DC operation only. GND(-)=GROUND CONNECTION Use speakers with an impedance of 2 or 4 Ohms ( 2 to 4 Ohm when used as Connect the GND terminal to the chassis ground of your car and take care of best bridging amplifier ) electric and mechanic contact.
  • Page 5: Stereo Mode

    STEREO MODE STEREO MODE CB600.4/CB1000.4/CB1500.4/CB2000.4/CB3000.4 CB2700.2 LINE OUT LINE INPUT HPF LPF 0dB +18dB 50Hz 4KHz 40Hz 500Hz FULL INPUT MODE GAIN BASS BOOST MODE PHASE REMOTE BASS BOOST GAIN INPUT MODE OUTPUT INPUT INPUT MODE GAIN BASS BOOST 0dB +10dB +10dB FULL FULL...
  • Page 6: Speakers Connections

    STEREO MODE SPEAKERS CONNECTIONS CB1000.1M2 CB600.4/CB1000.4 SPEAKER SPEAKER 2~4Ohm 2~4Ohm LINE OUT LINE INPUT FUSES +12V 25Hz 15Hz 400Hz 0dB +18dB GAIN SUB SONIC PHASE BASS BOOST REMOTE POWER INPUT BRIDGED CAR STEREO SPEAKER SPEAKER 2~4Ohm 2~4Ohm CB600.4:30Ax2 CB1000.4:35Ax2 CB1000.1D/CB1500.1D/CB1500.1D2/CB2500.1D/ CB1500.4/CB2000.4 CB2500.1D2/CB3500.1D/CB5000.1D LINE OUT...
  • Page 7 SPEAKERS CONNECTIONS SPEAKERS CONNECTIONS CB3000.4 CB600.2/CB1200.2 LEFT RIGHT SPEAKER SPEAKER 2~4Ohm 2~4Ohm SPEAKER SPEAKER 2~4Ohm 2~4Ohm +12V BRIDGED LEFT RIGHT FUSES +12V SPEAKER OUTPUT POWER INPUT BRIDGED POWER INPUT SPEAKER SPEAKER 2~4Ohm 2~4Ohm CB600.2:30Ax2 CB3000.4:150A CB1200.2:40Ax2 CB300.2 CB2700.2 LEFT RIGHT SPEAKER SPEAKER SPEAKER...
  • Page 8 SPEAKERS CONNECTIONS SPEAKERS CONNECTIONS CB1500.5 CB1000.1M2 MONO SPEAKER 2~4Ohm FUSES +12V SPEAKER OUTPUT MIN 2 30A X 3 POWER INPUT CB1000.1D MONO SPEAKER 1~4Ohm CB1500.5:100A FUSES +12V CB2700.5 SPEAKER OUTPUT POWER INPU T MIN 1 40A X 2 CB1500.1D MONO SPEAKER 1~4Ohm +12V SPEAKER...
  • Page 9 SPEAKERS CONNECTIONS SPEAKERS CONNECTIONS CB2500.1D CB5000.1D MONO SPEAKER 2~4Ohm MONO SPEAKER 1~4Ohm +12V FUSES +12V SPEAKER OUTPUT POWER INPUT SPEAKER OUTPUT POWER INPU T MIN 1 30A X 4 CB5000.1D:250A CB3500.1D CB1500.1D2 MONO SPEAKER MONO SPEAKER 2~4Ohm 1~4Ohm FUSES +12V FUSES +12V SPEAKER...
  • Page 10: Bridged Mode

    SPEAKERS CONNECTIONS BRIDGED MODE CB2500.1D2 CB1500.4/CB2000.4 MONO SPEAKER 4~8Ohm MONO SPEAKER 2~4Ohm FUSES +12V FUSES +12V SPEAKER OUTPUT POWER INPUT POWER INPU T MIN 2 30A X 4 BRIDGED CB1500.4:30Ax3 CB2000.4:35Ax3 MONO SPEAKER 4~8Ohm CB600.4/CB1000.4 CB3000.4 MONO SPEAKER 4~8Ohm MONO SPEAKER 4~8Ohm FUSES +12V...
  • Page 11 BRIDGED MODE BRIDGED MODE CB300.2 CB1500.5 MONO SPEAKER 4~8Ohm MONO SPEAKER 4~8Ohm BRIDGED LEFT RIGHT FUSE +12V SPEAKER OUTPUT POWER INPUT CB600.2/CB1200.2 CB1500.5:100A MONO SPEAKER 4~8Ohm MONO SPEAKER 4~8Ohm BRIDGED LEFT RIGHT FUSES +12V CB2700.5 MONO SPEAKER 4~8Ohm SPEAKER OUTPUT POWER INPUT CB600.2:30Ax2...
  • Page 12 SPEAKERS CONNECTIONS AT BRIDGED SPEAKERS CONNECTIONS AT BRIDGED CB1000.1D/CB1500.1D/CB2500.1D/CB3500.1D CB1000.1D/CB1500.1D/CB2500.1D/CB3500.1D AMP 1 AMP 1 MASTER FUSES +12V LINE OUT LINE INPUT 25Hz 15Hz 400Hz 0dB +18dB GAIN SUB SONIC PHASE BASS BOOST REMOTE SPEAKER OUTPUT POWER INPU T 30A X 5 MIN 1 CB1000.1D:40Ax2 CB1500.1D:40Ax3...
  • Page 13 SPEAKERS CONNECTIONS AT BRIDGED SPEAKERS CONNECTIONS AT BRIDGED CB5000.1D CB5000.1D AMP 1 MASTER AMP 1 LINE OUT LINE INPUT GAIN SUB SONIC PHASE BASS BOOST +12V REMOTE 25Hz 15Hz 400Hz 0dB +18dB SPEAKER OUTPUT POWER INPUT CB5000.1D:250A To a metal part of car BATTERY DC 12V...
  • Page 14 SPEAKERS CONNECTIONS AT BRIDGED SPEAKERS CONNECTIONS AT BRIDGED CB1500.1D2/CB2500.1D2 CB1500.1D2/CB2500.1D2 AMP 1 AMP 1 MASTER FUSES +12V LINE OUT LINE INPUT 25Hz 15Hz 400Hz 0dB +18dB GAIN SUB SONIC PHASE BASS BOOST REMOTE SPEAKER OUTPUT POWER INPU T MIN 2 CB1500.1D2:40Ax3 CB2500.1D2:30Ax4 To a metal...
  • Page 15: Speaker Connections At Bridged

    POWER CONNECTION LEADS WIRING INSTRUCTIONS POWER CONNECTION The battery terminal (+12V) must be connected directly to the positive terminal of POWER the vehicle battery to provide an adequate voltage source and minimize noise. Connecting the battery terminal lead to any other point (such as the fuse block ) will reduce the power output and may cause noise and distortion.
  • Page 16: Operation

    OPERATION INTERFERENCE After the amplifier has been installed and all connections have been made careful -lyand securely, turn the radio on so that the amplifier is switched on automatically. All cables are sources of interference. The power cable and RCA audio cable After a short power-on period, the amplifier reaches its full performance.
  • Page 17: Specification

    SPECIFICATION SPECIFICATION FOUR CHANNEL FOUR CHANNEL CB600.4 CB1000.4 CB1500.4 CB2000.4 CB3000.4 POWER DESCRIPTION POWER DESCRIPTION RMS Watts @ 4 Ohm RMS Watts @ 4 Ohm 60 X 4 85 X 4 115 X 4 150 X 4 250 X 4 Stereo 14.4V Stereo 14.4V RMS Watts @ 2 Ohm...
  • Page 18 SPECIFICATION SPECIFICATION CLASS AB MONO 2 OHM CHANNEL STABLE 2 OHM FIVE CHANNEL CB1000.1M2 POWER DESCRIPTION POWER DESCRIPTION CB1500.5 CB2700.5 RMS Watts @ 4 Ohm RMS Watts @ 4 Ohm Mono 14.4V 75 X4 100 X4 Stereo 14.4V RMS Watts @ 2 Ohm RMS Watts @ 2 Ohm Mono 14.4V 100 X 4...
  • Page 19 SPECIFICATION CLASS D MONO 1 OHM CHANNEL CB2500.1D CB3500.1D CB5000.1D POWER DESCRIPTION RMS Watts @ 4 Ohm 1200 Mono 14.4V RMS Watts @ 2 Ohm 1360 1800 Mono 14.4V RMS Watts @ 1 Ohm 1250 1750 2500 Mono 14.4V Watts Nominal 2500 3500 5000...

Table of Contents