Front Panel Information Display - Harman Kardon AVR8000 Service Manual

AVR8000

Front Panel Information Display

L K
A
B
A Upper Display Line
B Lower Display Line
C OSD Indicator
D Multiroom Indicator
A Upper Display Line: Depending on the unit's
status, a variety of messages will appear here. In
normal operation, the current input source name
will appear on this line.
B Lower Display Line: Depending on the
unit's status, a variety of messages will appear
here. In normal operation, the current surround
mode name will appear on this line.
C OSD Indicator: When the OSD system is in
use, this indicator lights to remind you that the
other indicators in this display do not function
when the On-Screen Display is being used.
D Multiroom Indicator: This indicator lights
when the multiroom system is active. Note that
it will remain lit when the multiroom system is
in use even though the main room system is in
the Standby mode and all other indicators are
dark. (See page 38 for more information on the
Multiroom system.)
E Speaker/Channel Input Indicators: These
indicators are multipurpose, indicating either the
speaker type selected for each channel or the
incoming data-signal configuration. The left,
center, right, right surround and left surround
speaker indicators are composed of three boxes,
while the subwoofer is a single box. The center
box lights when a "Small" speaker is selected,
and the two outer boxes light when "Large"
J H
I
E Speaker/Channel Input Indicators
F PRESET Indicator
G MEMORY Indicator
H STEREO Indicator
speakers are selected. When none of the boxes
are lit for the center, surround or subwoofer
channels, no speaker has been selected for one
of those positions. (See page 21 for more infor-
mation on configuring speakers.) The letters
inside each of the center boxes display the active
input channels. For standard analog inputs, only
the L and R will light, indicating a stereo input.
When a digital source is playing, the indicators
will light to display the channels being received
at the digital input. When the letters flash, the
digital input has been interrupted. (See pages
25 & 32 for more information on the Channel
Indicators.)
F PRESET Indicator: This indicator lights
when the tuner is in use to show that the
present number for the current station being
listened to appears in the Upper Display Line.
(See page 34 for more information on tuner
presets.)
G MEMORY Indicator: This indicator flashes
when entering presets and other information
into the tuner's memory.
H STEREO Indicator: This indicator lights
when an FM station is being tuned in stereo.
I TUNED Indicator: This indicator lights when
a station is being received with sufficient signal
strength to provide acceptable listening quality.
G F
C D
I TUNED Indicator
J AUTO Indicator
K 192kHz Indicator
L 96kHz Indicator
J AUTO Indicator: This indicator lights when
the tuner's Auto mode is in use.
K 192kHz Indicator: This indicator lights
when the input source has a 192kHz bit rate.
L 96kHz Indicator: This indicator lights
when the input source has a 96kHz bit rate.
7 FRONT PANEL INFORMATION DISPLAY
harman/kardon
E