Front Panel Information Display - Harman Kardon AVR510 Service Manual

AVR510

Front Panel Information Display

DTS
DOLBY D
A
PCM
MP3
B
A Bitstream Indicators
B Optical Source Indicators
C DTS Mode Indicator
D Dolby Digital Indicator
E Coaxial Source Indicators
F Dolby Pro Logic Indicator
G Analog Input Indicator
H Dolby 3 Stereo Indicator
I VMAx Mode Indicator
A Bitstream Indicators: When the input is a
digital source, one of these indicators will light to
display the specific type of data signal in use.
B Optical Source Indicators: These indica-
tors light to show when an Optical Digital Input
has been selected.
C DTS Mode Indicator: This indicator lights
when a DTS-encoded source is playing.
D Dolby Digital Indicator: This indicator
lights when a Dolby Digital source is being
played.
E Coaxial Source Indicators: These indica-
tors light to show when a Coaxial Digital Input
has been selected.
F Dolby Pro Logic Indicator: This indicator
lights when the Dolby Pro Logic mode has been
selected.
G Analog Input Indicator: This indicator
lights when an analog input source has been
selected.
H Dolby 3 Stereo Indicator: This indicator
lights when the Dolby 3 Stereo Mode has been
selected.
I VMAx Mode Indicator: This indicator
lights when the VMAx mode is in use.
VMAx F appears when the Far Field VMAx
mode is selected; VMAx N appears when the
Near Field VMAx mode is selected. (See page
27 for a description of the VMAx modes.)
Z Y
MUTE
OPTICAL 1 2 3 COAXIAL 1 2 3
DIGITAL PRO LOGIC
C D E F G
J 5-Channel Stereo Indicator
K Logic 7 Mode Indicators
L Hall Mode Indicators
M OSD Indicator
N Theater Mode Indicator
O Night Mode Indicator
P Multiroom Indicator
Q Speaker/Channel Input Indicators
R Preset Number/Sleep Timer
J 5-Channel Stereo Indicator: This indica-
tor lights when the 5-Channel Stereo mode has
been selected.
K Logic 7 Mode Indicators: These indica-
tors light when the Logic 7 mode is in use.
LOGIC 7C appears for the Cinema version
of Logic 7, LOGIC 7M appears for the
Music version of Logic 7. (See page 27 for a
description of the Logic 7 Modes.)
L Hall Mode Indicators: These indicators
light when one of the Hall modes has been
selected.
M OSD Indicator: When the OSD system is in
use, this indicator lights to remind you that the
other indicators in this display do not function
when the On Screen Display is being used.
N Theater Mode Indicator: This indicator
lights to show that the Theater mode is in use.
O Night Mode Indicator: This indicator
lights when the AVR 510 is in the Night mode,
which preserves the dynamic range of digital
program material at low volume levels.
P Multiroom Indicator: This indicator lights
when the multiroom system is active. Note that
it will remain lit when the multiroom system is
in use even though the main room system is in
the Standby mode and all other indicators are
dark. (See page 35 for more information on the
Multiroom system.)
X W V U T
AUTO TUNED ST MEMORY PRESET
ANALOG
VMAx NF 5.1 LOGIC 7 CM
3-STEREO 5 CH STEREO HALL 12 THEATER
H I J K L M
7 FRONT PANEL INFORMATION DISPLAY
harman/kardon
SR Q
O O
L 0 C 0 R
SLEEP
O O
O O
LS RS
LFE
OSD
O O
NIGHT MULTI
N O P
S Preset Indicator
T Sleep Indicator
U Memory Indicator
V Stereo Indicator
W Tuned Indicator
X Auto Indicator
Y Main Information Display
Z Mute Indicator
Q Speaker/Channel Input Indicators: These
indicators are multipurpose, indicating either the
speaker type selected for each channel or the
incoming data-signal configuration. The left,
center, right, right surround and left surround
speaker indicators are composed of three boxes,
while the subwoofer is a single box. The center
box lights when a "Small" speaker is selected,
and the two outer boxes light when "Large"
speakers are selected. When none of the boxes
are lit for the center, surround or subwoofer
channels, no speaker has been selected for one
of those positions. (See page 22 for more infor-
mation on configuring speakers.) The letters
inside each of the center boxes display the active
input channels. For standard analog inputs, only
the L and R will light, indicating a stereo input.
When a digital source is playing, the indicators
will light to display the channels being received
at the digital input. When the letters flash, the
digital input has been interrupted. (See pages 23
& 29 for more information on the Channel
Indicators.)
R Preset Number/Sleep Timer: When the
tuner is in use, these numbers indicate the spe-
cific preset memory location in use. (See page
31 for more information on preset stations.)
When the Sleep function is in use, these num-
bers show how many minutes remain before
the unit goes into the Standby mode.