Yamaha XMAX 250 YP250R Owner's Manual page 20

INSTRUMENT AND CONTROL FUNCTIONS
3
3. Push the "MODE" button, and
the minute digits will start flas-
hing.
4. Push the "SET" button to set the
minutes.
5. Push the "MODE" button and
then release it to start the clock.
The display will return to the
"Total" mode.
Ambient temperature display
1. Frost warning indicator
2. Negative symbol
3. Ambient temperature
This display shows the ambient tem-
perature from-30°C to 50°C.
The frost warning indicator "*" auto-
matically comes on if the temperature
is lower than 3°C
1. Oil change indicator
3-6
Service indicator
When periodic maintenance and lubri-
cation is necessary (See page 6-3.),
"OIL" will appear in the display until the
Service indicator reset is made.
To reset the service indicator:
1. Turn the key to "ON".
2. Hold the "MODE" and "SET" but-
ton pushed for two to five
seconds.
3. Release the buttons, and the ser-
vice indicator will go off.
NOTE:
The service indicator will come
on at the initial 1000 km and
every 3000 km thereafter.
If periodic maintenance and
lubrication is performed before
the service indicator comes on,
the indicator must be reset as
soon as possible so that it comes
for the next periodic maintenance
and lubrication interval.