Replacing A Fuse - Yamaha GRIZZLY 450 YFM45FGY Owner's Manual

ECB00930
NOTICE
To charge a VRLA (Valve Regulated Lead Acid)
battery, a special (constant-voltage) battery
charger is required. Using a conventional bat-
tery charger will damage the battery. If you do
not have access to a constant-voltage battery
charger, have a Yamaha dealer charge your
battery.
To store the battery
G
If the ATV will not be used for more than one
month, remove the battery, fully charge it, and
then place it in a cool, dry place.
G If the battery will be stored for more than two
months, check it at least once a month and fully
charge it if necessary.
To install the battery
TIP
Be sure the battery is fully charged.
1. Place the battery in its compartment.
2. Connect the positive battery lead first, then
connect the negative battery lead by installing
their bolt.
1. Positive battery lead (red)
2. Negative battery lead (black)
3. Install the battery holding plate by installing
the bolts.
4. Install the seat. (See page 4-18.)
ECB00940
NOTICE
Always keep the battery charged. Storing a dis-
charged battery can cause permanent battery
damage.
EBU25325

Replacing a fuse

The main fuse and the fuse box are located under
the seat. (See page 4-18.)
8-52
1
2
8